Primary Tools

• Low-pressure chemical sprayer (handheld or wheeled) Ideal for even SIMIX delivery on fins without bending or damaging coils.
• Soft-bristle coil brushes & fin combs Gently remove dirt without fin damage.
• Portable wet/dry vacuum. For extracting loosened debris and rinsate.
• Adjustable extension wand
• Helps reach high rooftop and tight coil banks.

Optional Add-Ons

• Biodegradable degreasing solution (for greasy coils). Pre-treat stubborn, baked-on grease before SIMIX application.
• Infrared thermometer & portable anemometer or before/after performance measurement (kWh + temp delta).

Best For: Rooftop units, air handlers, chillers, and DX split coils.

Primary Tools

• Tripod or backpack sprayer (1–4 gal) for applying SIMIX Roof Cleaner or Protectant evenly across large spans.
• Soft roof brushes/microfiber rollers help lift embedded dirt without membrane abrasion.
• Pressure washer (adjustable PSI) Use lower PSI when rinsing; avoid membrane damage (typically <1500 PSI).

Surface Protection

• Non-abrasive scrub pads/mop kits
• Protective roof boots + safety harness system. Essential for roof safety compliance.

Best For: Commercial buildings, warehouses, schools, and retail roofs.

Primary Tools

• Foam cannon or compressed air foamer creates cling time for SIMIX degreaser on vertical/horizontal equipment surfaces.
• Heavy-duty floor scrubber with chemical tank. For large kitchen floor areas, it reduces labor and improves uniform cleaning.
• Squeegees + microfiber pads. Quick removal of dissolved grease.

Safety Gear

• Slip-resistant footwear
• Chemical-resistant gloves and aprons

Best For: Restaurants, commissaries, stadium kitchens, institutional kitchens.

Primary Tools

• 45–175 RPM floor machine (orbital/swing buff) for applying SIMIX Concrete Cleaner or Polishing Coating, as needed.
• Microfiber pad set (various grits). Removes soil and brings shine after SIMIX application.
• Auto scrubber (ride-on or push) For warehouses/coverages >10,000 sq ft.

Maintenance Accessories

• Edge cleaning kit
• Dust containment vacuum

Best For: Distribution centers, retail floors, garage floors, polished concrete.

Primary Tools

• Pressure washer with adjustable nozzle Good general tool; pair with SIMIX cleaners for painted or concrete surfaces.
• Surface brushes (telescoping handle) For vertical walls and truck bays.
• Bucket + microfiber mop system. Great for detail areas and walk-off zones.

Safety & Access

• Extension ladders
• Rolling scaffold platforms
• Protective eyewear / respirator masks

Best For: Facades, dock floors, exterior equipment pads, sidewalks.

Primary Tools

• Low-pressure sprayer w/ adjustable nozzle Safe on sensitive equipment surfaces.
• Lint-free microfiber towels Prevent fibers from entering sensitive ducts/equipment.
• BAS / power meter + thermal imaging Optional but recommended for quantifying ROI via before/after performance.

Best For: CRAC units, heat exchangers, condenser coils, mechanical rooms.

✔ Match sprayer pressure to surface:

• Soft surfaces (coils, floors) → low pressure
• Hard concrete (exterior pad) → moderate pressure

✔ Pre-wet high-soil areas before SIMIX application to improve penetration.

✔ Use agitation tools thoughtfully so as not to damage substrates.

✔ Track before/after metrics (energy, labor time, soil level) to quantify ROI.

Choosing efficient equipment accelerates ROI by:

• Reducing labor hours
• Improving surface contact and dwell time
• Minimizing rework
• Enabling more consistent results